Mr. Steam SAH6000 FD-5
Steam@Home Series 6kW Steam Shower Generator Package, Mr. Steam Testing
Model
FD-5
SKU
SAH6000C1
UPC
767931900976
The Mr. Steam SAH6000 steam shower generator package is engineered for home steam rooms with dimensions from 111 to 150 adjusted cubic feet (ACF). Testing
FD-5
MSRP
$1,595.00
Your Price
$1,116.50
Nicola TESTla
SAH6000 Generator
- Unitized stainless steel reservoir
- Durable electronic components
- Electronic water-level control system
- Stainless steel design inside and out
- Low voltage safety control circuits
- Built in 24-volt circuit
- ASME safety valve
- Full port drain valve
- UL/CSA/CE listed
SteamStart Control
- On/Off operation
- 20-Minute timer
- Low profile
- Polished Chrome trim
- Inside/outside the steam/shower enclosure installation
- Low voltage operation
Cool-to-the-Touch Steamhead
- Quieter operation
- Integral reservoir for a scented steam bath
- Low profile and sleek design
- Polished Chrome finish
Acrylic Shield
- Clear Lexan construction, 1/8" thick, transparent look
- Measures 4-3/8" in diameter and is 1/2" deep
- Integral, 1-5/8" diameter mounting hole
- 6.0KW Steam bath generator
- SteamStart surface-mounted control, 1-1/2" diameter, 1/8" deep
- 3-Pin Control cable, 30' long, hard-wired to control with plug-in connector
- Cool-to-the-Touch steamhead, 1/2" NPT, 3-1/16" diameter, 1-13/16" deep
- Acrylic shield, 4-3/8" diameter, 1/2" deep
- RTV silicone sealant, .5 ounce tube
- Installation and operation manual
- Limited warranty
| Model | SAH6000 |
|---|---|
| Maximum Adjusted Cubic Feet | 150 |
| Kilowatt Rating | 6.0 KW |
| Shipping Weight | 25 lbs |
| AC Voltage | 240V AC |
| DC Voltage | 5V DC |
| Phase | Single Phase |
| Nominal Amperage | 25 Amps |
| Recommended Minimum Copper Wire Supply | 8 AWG |
| Water Supply Connection | 3/8" NPT |
| Generator Steam Line Connection | 3/8" NPT |
| Steam Head Connection | 1/2" NPT |
| Drain Connection | 1/4" NPT |
| Safety Relief Valve Connection | 3/4" NPT |
| Safety Relief Valve PSIG | 15 PSIG |
| Control "Rough In" Cut Out | 7/8" Diameter |
| Generator Control Connection | 3-Pin, Plug-In Connector |
| Generator Control Cable | 30', 3 Conductor, 24 AWG, Shielded Cable |
| Width | 14-3/8" |
| Depth | 5-3/16" |
| Height | 14-7/8" |

