Amerec AK4.5
AK Series 4.5KW Steam Shower Generator, Amerec
If you see a lower price on the Amerec AK4.5 steam generator, call us, and we’ll match it, plus 10% of the difference!
The Amerec AK11 is designed for home and day spa steam baths with dimensions up to 90 adjusted cubic feet (ACF).
- Sequential temperature control for consistent flow
- Stainless steel tank
- Industrial grade, serviceable heating elements
- Durable electronic components
- Electronic water-level control system
- Low voltage safety control circuits
- Available Auto Drain automatic draining system
- Ability to field wire phase 1PH or 3PH
- Ability to connect multiple generators to heat steam baths larger than 550 cubic feet
- Operates with inside/outside shower, on/off, time/temperature controls
- Full 3/4" port drain valve
- ASME safety valve
- UL/CSA/CE listed
- 4.5KW steam bath generator
- Installation and operation manual
- Limited warranty
| Model | AK4.5 |
|---|---|
| Shipping Weight | 35 lbs |
| Minimum Adjusted Cubic Feet | 60 |
| Maximum Adjusted Cubic Feet | 90 |
| Kilowatt Rating | 4.5 KW |
| AC Voltage | 240V AC |
| DC Voltage | 5V DC |
| Phase | Single Phase |
| Nominal Amperage | 18 Amps |
| Recommended Protective Device | 30 Amp |
| Recommended Minimum Copper Wire Supply | 10 AWG |
| Water Supply Connection | 3/8" NPT |
| Generator Steam Line Connection | 1/2" NPT |
| Steam Head Connection | 1/2" NPT |
| Drain Connection | 3/4" NPT |
| Safety Relief Valve Connection | 3/4" NPT |
| Safety Relief Valve | 10 PSIG |
| Control "Rough In" Cut Out | 2-3/8" Diameter |
| Control Sensor Cable | 25', 2 Conductor, 22 AWG, Shielded Cable |
| Control Sensor "Rough In" Cut Out | 7/8" Diameter |
| Generator Control Connection | 8 Pin, Snap-In Connector |
| Generator Control Cable | 25', 8 Conductor, 28 AWG, Shielded Cable |
| Width | 16-1/2" |
| Depth | 6-1/4" |
| Height | 15" |
When installed with an Amerec AK Series steam generator, the Amerec K60 digital control package uses an easy-to-use touch pad to maintain the steam room environment.
When installed with an Amerec AK Series steam generator, the Amerec KT60 digital control package features an easy-to-use membrane touch pad to control the steam bath.
The Amerec DKT60/K60 steam shower package is designed to be installed with Amerec AK Series steam generators.
Designed to be installed with Amerec AK Series steam generators, the Amerec R30K steam shower control is an easy-to-use 30-minute press on timer with indicator light.
Maximize your warranties!
Quality plumbing fittings are the first step to ensuring a TROUBLE-FREE installation!
Maximize your warranties!
No need for frequent trips searching for those special electrical components.
CABLE, 8-PIN 25', TANDEM, AG/AK/DC, STEAM BATH PART, AMEREC
UKU Local sauna controller makes sauna heating easy and comfortable. It can be used with different manufacturers’ heaters.
Stylish and attractive, this CFSH ComfortFlo steam head with Insulator has been designed to provide a safe and pleasurable steam bath experience.
Automatic draining is available on any Amerec AK or 3K Series residential steam bath generator with the installation of this motorized, electronically operated model ADK drain valve.
A cleaner specially formulated for steam showers!
No mixing and ready to use, this 22-ounce convenient spray cleaner is all that is required to clean and sanitize your steam shower.
A cleaner specially formulated for steam rooms!
This powerful disinfectant cleaner kills mold, mildew and odor-causing fungi on contact.