Amerec ES7
EasySteam Builder Series 7.0KW Steam Bath Generator, Amerec
Model
ES7
Control Included! The Amerec ES7 steam bath generator from the ES Builder Series boasts a 7 kilowatt power rating and is made for home steam baths with dimensions between 100 to 220 adjusted cubic feet.
- For steam bath enclosures up to 220 adjusted cubic feet
- Available in 240V/1PH operation
- Electrical can be wired for 1-phase or 3-phase in the field
- Stainless steel tank
- Industrial grade, serviceable heating element
- Modular "snap-in" control connections
- Durable electronic components
- Electronic water-level control system
- Low-voltage safety control circuits
- Optional ADK Automatic Drain system
- Full port drain valve
- ASME safety valve
- UL/CSA/CE listed
R30K Control
- Power indicator light
- 30-Minute time cycle
- Available in Polished Chrome
- On/off control
- Easy-to-use, press on timer
Swipe horizontally to reveal full table content.
| Model | ES7 |
|---|---|
| Minimum Adjusted Cubic Feet | 100 |
| Maximum Adjusted Cubic Feet | 220 |
| Kilowatt Rating | 7 KW |
| Shipping Weight | 27 lbs |
| AC Voltage | 240V AC |
| DC Voltage | 5V DC |
| Phase | Single Phase |
| Nominal Amperage | 29 Amps |
| Recommended Protective Device | 40 Amp |
| Recommended Minimum Copper Wire Supply | 8 AWG |
| Water Supply Connection | 3/8" NPT |
| Generator Steam Line Connection | 1/2" NPT |
| Steam Head Connection | 1/2" NPT |
| Drain Connection | 1/2" NPT |
| Safety Relief Valve Connection | 3/4" NPT |
| Safety Relief Valve | 10 PSIG |
| Control "Rough-In" Cut-Out | 2-3/8" Diameter |
| Control Sensor Cable | 25', 2 Conductor, 22 AWG, Shielded Cable |
| Control Sensor "Rough In" Cut Out | 7/8" Diameter |
| Generator Control Connection | 8 Pin, Snap-In Connector |
| Generator Control Cable | 25', 8 Conductor, 28 AWG, Shielded Cable |
| Width | 16-1/2" |
| Depth | 6-1/4" |
| Height | 13" |